DJ Moreno
15. January 2005, 11:57
Ich hab einen High-Class Endverstärker zu verkaufen der wohl kein Auge trocken lässt...
Phoenix Gold - XS 4600
http://dj-moreno.elbone.net/phoenix.jpg
Features:
-Separate Front and Rear Defeatable 24dB per Octave Highpass/Lowpass Crossovers, Adjustable via Plug-in resistor Networks
-Capable of 48dB per Octave Rear Lowpass Output
-Auxiliary Output to Send Lowpass or Highpass Signals to an Additional Amplifier
-LPL Ready, Allows the use of an Optional LPL44 Lowpass Level Control to Adjust the Volume of both Front and Rear Outputs
-Fully Differential Hi-Level Input Capability for Easy Integration with most Factory Headunits
-Fully Differental Line-Level Inputs eliminate common noise problems
-Rear Fade/Non-Fade Switch Eliminates the need for "Y" Connectors by Sending Signals from the Front Inputs to the Rear Inputs Internally
-Tri-Linear Capability Alows Simultaneous Stereo and Bridged Mnoo Operation for both Front and Rear Outputs
-Adjustable Front and Rear "Twin "" Bass Equalization with +18dB of Boost Centered @ 45Hz
-2 ohms Bridged / 1 ohm Stereo Approved
-Advanced Muting Circuitry Eliminates Turn-On And Turn-Off Noises
-Advanced Thermal and Overload Protection
-2 layer, 2 ounce, Covver G10 Glass-Epoxy Printed Circuit Boards
-Power-On LED Indicator
-Audiophile Grade Metal Film Capacitors and 1! Metal Film REsistors
-PWM Mosfet Power Supply
-24kt Gold Plated Power and Speaker Terminals
-Glass Filled Nylon Isolation Mounting Feet
-24kt Gold Plated Signal Input and Output Jacks
-XS Linkable Using The Optional XS Link to Connect Multiple Amplifiers Together
Specifications:
Continuous Output Power
4 ohm Stereo: 75 Watt x 4
2ohm Stereo : 150 watt x 4
3 ohm bridged : 300 watt x 2
Das Ding geht wie Sau, ich hab damit einen Subwoofer sowie 2 Kick und Hochtöner an jeder Seite betrieben ohne dass da was nachgibt...
VP: 300,-
Kontakt:
Via ICQ, PM oder
dj_moreno@gmx.net
[ 15.01.2005, 11:59: Beitrag editiert von: DJ:Moreno ]
Phoenix Gold - XS 4600
http://dj-moreno.elbone.net/phoenix.jpg
Features:
-Separate Front and Rear Defeatable 24dB per Octave Highpass/Lowpass Crossovers, Adjustable via Plug-in resistor Networks
-Capable of 48dB per Octave Rear Lowpass Output
-Auxiliary Output to Send Lowpass or Highpass Signals to an Additional Amplifier
-LPL Ready, Allows the use of an Optional LPL44 Lowpass Level Control to Adjust the Volume of both Front and Rear Outputs
-Fully Differential Hi-Level Input Capability for Easy Integration with most Factory Headunits
-Fully Differental Line-Level Inputs eliminate common noise problems
-Rear Fade/Non-Fade Switch Eliminates the need for "Y" Connectors by Sending Signals from the Front Inputs to the Rear Inputs Internally
-Tri-Linear Capability Alows Simultaneous Stereo and Bridged Mnoo Operation for both Front and Rear Outputs
-Adjustable Front and Rear "Twin "" Bass Equalization with +18dB of Boost Centered @ 45Hz
-2 ohms Bridged / 1 ohm Stereo Approved
-Advanced Muting Circuitry Eliminates Turn-On And Turn-Off Noises
-Advanced Thermal and Overload Protection
-2 layer, 2 ounce, Covver G10 Glass-Epoxy Printed Circuit Boards
-Power-On LED Indicator
-Audiophile Grade Metal Film Capacitors and 1! Metal Film REsistors
-PWM Mosfet Power Supply
-24kt Gold Plated Power and Speaker Terminals
-Glass Filled Nylon Isolation Mounting Feet
-24kt Gold Plated Signal Input and Output Jacks
-XS Linkable Using The Optional XS Link to Connect Multiple Amplifiers Together
Specifications:
Continuous Output Power
4 ohm Stereo: 75 Watt x 4
2ohm Stereo : 150 watt x 4
3 ohm bridged : 300 watt x 2
Das Ding geht wie Sau, ich hab damit einen Subwoofer sowie 2 Kick und Hochtöner an jeder Seite betrieben ohne dass da was nachgibt...
VP: 300,-
Kontakt:
Via ICQ, PM oder
dj_moreno@gmx.net
[ 15.01.2005, 11:59: Beitrag editiert von: DJ:Moreno ]